Canon PIXMA MP990
Driver Details
File Version
|
1.05
|
File Size
|
17.53 MB
|
File Languages
|
English | Japanese
|
Post Date
|
10/11/2013
|
History
|
[Ver.1.05]
- Windows 8.1 has been added as a supported OS.
- Windows 8 has been added as a supported OS.
[Ver.1.04]
IJ Scan Utility:
- The operation of the printer's communication timer is optimized on the printer driver.
[Ver.1.03]
Printer Driver:
- When cancelling the print job in collated printing multiple numbers of copies, the print job may not be deleted.
Scanner Driver:
- The problem that an error may occur at the MP Driver installation in rare cases has been rectified.
- The problem that the scanner driver may freeze at the next launch when closing the scanner driver after film previewing has failed has been rectified.
[Ver.1.02]
Scanner Driver:
- The problem that scanning cannot be performed properly in some of the application software has been rectified.
[Ver.1.01]
- Officially supports Windows 7.
Scanner Driver:
- The problem that color matching cannot be performed properly has been rectified.
|
Environment
|
Windows 8.1(32bit)
Windows 8.1(64bit)
Windows 8(32bit)
Windows 8(64bit)
Windows 7(32bit)
Windows 7(64bit)
Windows Vista(32bit)
Windows Vista(64bit)
Windows XP SP2 or later
|
Caution
|
Printer Driver:
1.With Internet Explorer 11, a web site containing Japanese may not be printed properly. In Windows Update, update the OS and Internet Explorer to the latest version.
2.If the printer driver is installed in Windows 8, and if Windows 8 is upgraded to Windows 8.1 while keeping the printer driver installed, Enable bidirectional support in the printer properties may be deselected, disabling detection of the ink level, etc. Re-install the printer driver after upgrading to Windows 8.1 and Enable bidirectional support is selected.
Scanner Driver:
1.[Windows 7] While scanning, the computer goes into the sleep status if OS setting is set to do so. Scanning stops in the Sleep status.
Preventive action:
To scan the data with high resolution and large capacity, specify the enough time to complete the scanning or disable the setting.
2.If the scanner driver is installed in Windows 8, and if Windows 8 is upgraded to Windows 8.1 while keeping the scanner driver installed, scanning from the product (by using the SCAN button) may not be available. Re-install the scanner driver after upgrading to Windows 8.1.
IJ Network Tool:
1. In the environment where the Firewall software operates, as the printer detection using LAN communication is inhibited, the setup may not be competed.
Preventive action:
Disable the Firewall setting temporarily, or close the Firewall software, then, perform the setup. In each case, disconnect the network from the Internet first.
2. When using of IJ Network Tool under Windows Vista 64bit version, the following message may be displayed at the setup:New Port could not be created.
Preventive action:
Cancel the setup once, then retry the setup after restarting the computer.
|